Follow the bearings beneath to eliminate the container drive and break gathering:
- Disconnect the washer from the divider outlet
- Turn the water spigots off and eliminate the fill hoses the from the water valve put a towel on the floor under the fill hoses to find any water trickling from the hoses
- Make sure that there is no water on the washer and eliminate the channel hose put a towel on the floor under the channel hose to get any water left on the hose and the siphon
- Open the controls board
- Remove the bureau
- Remove the instigator
- Remove the tub spread
- To eliminate the tub spread, push down on the cover and unfasten the holding tabs
- Now you should utilize a spanner nut wrench to eliminate the spanner nut
- After eliminating the spanner nut, you should eliminate the turn drum
- To eliminate the turn drum you will have to shake it from side to side until it loosens up and you could take it out
- Remove the bin drive block by tapping it up with a mallet until it comes out
- Now you should set out the washer on the floor. Ensure you put or a mat or something different on the floor to secure the washer
- Disconnect the hoses from the siphon
- Disconnect the wire outfit from the engine and ensure they are not appended to the gear case before eliminating the gear case
- Unscrew the three gear case holding screws or fasteners and eliminate the gear case
- Next you should turn the brake cam driver counterclockwise to pack the brake and as you turn it, start like unscrewing it is not fastened, yet the unscrewing movement appears to help getting African Baskets bushel drive and brake tube out
Follow the headings underneath to introduce the crate drive and break gathering:
- Start by introducing the bushel drive and brake tube
- Grab the brake cam and turn it counterclockwise while pushing the bushel drive and brake get together right in/lid>
- Make sure to have the run at around 12 o’clock and break cam at around 6 o’clock
- Install the apparatus case and fix the three holding screws or fasteners
- Connect the wire tackle to the engine and secure it to the gear case
- Install the hoses to the siphon
- Set the bushel drive block on the crate drive and brake tube
- Set the turn drum set up and screw the spanner nut utilizing the spanner nut wrench. Ensure is tight
- Install the tub spread and ensure that the tabs lock set up
- Install the instigator
- Connect the 2 fill hoses and open the water spigots
- Connect the washer to the divider outlet and give it a shot
In the event that you need to see my free recordings on the most proficient method to does this fix click on the connection in my asset box?
Hello there, my name is Angel Acevedo. I have more than 30 years experience fixing washers and dryers.
I produce recordings on the best way to fix washers and dryers and you could see them for nothing in my site.